- Easy to use single component material. It polymerizes under the influence of air humidity. High polymerization rate.
- It forms a hard and at the same time elastic seamless coating over the entire area of application.
- The stability of the coating in a wide range of temperatures.
- Excellent adhesion to most building materials.
- Exceptionally high chemical and biological resistance. Excellent mechanical performance, abrasion resistance.
- Absolutely non-toxic after polymerization.
Customer matched zone "Украина"
View cart “Sealant HYPERSEAL®-25LM white” has been added to your cart.
HYPERDESMO ® -D 5l.
HYPERDESMO ® -D – one-component liquid material based on elastic polyurethane resins. Polymerizes under the influence of humidity, forming a seamless durable elastic covering.
- To protect and prevent corrosion of concrete, mosaic, metal, ceramics, wood and other building materials.
- Creation of non-dusting, antibacterial, hygienic, anti-slip, sparkles and decorative industrial flooring that can withstand light and medium loads (parking lots, warehouses, cold rooms, industrial premises, hospitals, etc.).
- Surface treatment and protection: tanks and storages with chemically, biologically and radiation-aggressive products, as well as sewage treatment plants.
- Sheeting in the food industry, the chemical industry, pharmaceutics, health care, power and mechanical engineering.
- Sealing, painting, hydrophilization of complex iron-concrete structures and elements.
- Chemically finishing and wear-resistant layer in waterproofing systems.
Categories: Bridge waterproofing, Roof waterproofing, Terraces waterproofing, Waterproofing of stands of stadiums, Waterproofing of tanks
AQUASMART ® -DUR - is a two-component epoxy primer (coating), water-based. The ratio for mixing components specifically for ease of 1: 1 by volume, which allows use material in small portions. AQUASMART ® -DUR - is low viscosity and well impregnates the base, has a long pot life after mixing the components. An excellent sheeting for concrete and metals, it is easily colored by pigment pastes for water emulsions. It has a very low tendency to yellowing under the action of ultraviolet. It is applied with a brush, roller in 1 or 2 layers.
MICROSEALER-50 - single component primer low viscosity based on polyurethane for processing of various surfaces. This primer is characterized by a very low viscosity and balanced speed drying out that provides great wetting, impregnation and painting of various high and low grade surfaces porosity as well as non-porous surfaces (eg glass and metals). Besides, This primer can effectively used on dry and wet concrete, even on fresh concrete, not only as primer but also as cheap enhancing sealing material concrete life. The resulting film demonstrates excellent mechanical properties: tensile strength> 300%, tensile strength exceeds 39 N / mm2. Apply with brush or roller. Consumption: 100-200 g / m2, depending on the porosity of the surface.
Weight 20kg. Used for: gypsum and cement slabs, asphalt membranes (also for repair), roof insulation, cement surfaces, waterproofing of a light roof from metal or fiber cement basement insulation, foundations, indoor areas with high humidity. Detailed characteristics: Hyperdesmo-PB-1K
Microsealer-PU - is a one-component, consisting of 100% solid particles, polyurethane primer, ideal for almost any basis. The material has a low viscosity and excellent impregnating properties, ideal for wet or dry concrete. Moreover, the material is ideally suited for both porous and non-porous smooth surfaces, such as glass, polished aluminum or metal surfaces. It has excellent mechanical properties and high elasticity — the elongation of the film is 400%, which is comparable to the Hyperdesmo® product line, and the tensile strength is more than 20 N / mm2. Microsealer-PU can be used on wet or "green" concrete, not only as a primer, but also as an impregnation, giving concrete durability. Apply with brush or roller. Consumption: 100-500 g / m2, depending on the porosity of the base.
HYPERDESMO®-2K-W is a two-component thixotropic mastic based on high-quality polyurethane resins without solvents. After polymerization, it forms a durable, flexible, hydrophobic coating for waterproofing and protection. Recommended for waterproofing tanks. It is certified for use in contact with drinking water. To put with the roller in two layers with an expense on one layer makes 1 kg / m2. At the bottom of the tank can be applied in a single layer of 2 kg / m2.
HYPERDESMO®-ADY-E - is a single-component polyurethane lacquer, which polymerizes under the influence of atmospheric humidity, forming a transparent membrane of increased elasticity with excellent uniform adhesion over the entire surface. The varnish is completely aliphatic: there is no yellowing and color change as a result of direct exposure to sunlight. It is the ideal solution for protecting HYPERDESMO® color. Based on pure elastomeric hydrophobic polyurethane resins, with the result that it has excellent resistance to mechanical, chemical, thermal and other influences. Excellently colored with Alchimica® pigment pastes. Apply by brush, roller or airless spray in one or more layers. Minimum consumption per layer: 0.1 kg / m2.
HYPERDESMO®-H.A.A. - unique polyurethane mastic for reliable waterproofing and protection. Based on the successful combination of Hyperdesmo and Accelerator-3000A, which makes it possible to apply mastic in thicker layers without the formation of bubbles, and also accelerates the polymerization process. Accelerator-3000A is turned on in a blocked state so that when it comes into contact with moisture it is released and automatically accelerates the process of polymerization of the material. Due to the unique composition of HYPERDESMO®-H.A.A. It quickly polymerizes without the formation of internal membrane defects with excellent physic mechanical and operational abilities. In addition, to achieve the minimum required thickness of the waterproofing membrane HYPERDESMO®-H.A.A. can be applied with fewer layers, which reduces labor costs. Apply with a brush, roller or airless sprayer in one or two layers with a minimum total consumption of 1.5-2.0 kg / m2
Aquadur is a two-component water-based epoxy water-borne emulsion system. It is used as a primer in preparing the base for HYPERDESMO® systems or independently as a protective coating. Does not contain volatile organic solvents - can be used in poorly ventilated areas. May be diluted with water. Ideal for use in conditions of negative pressure and high humidity. It is also effectively used as a vapor barrier.