- Easy to use single component material. It polymerizes under the influence of air humidity. High polymerization rate.
- It forms a hard and at the same time elastic seamless coating over the entire area of application.
- The stability of the coating in a wide range of temperatures.
- Excellent adhesion to most building materials.
- Exceptionally high chemical and biological resistance. Excellent mechanical performance, abrasion resistance.
- Absolutely non-toxic after polymerization.
Customer matched zone "Украина"
View cart “Mastic HYPERDESMO®-HAA 6 kg” has been added to your cart.
HYPERDESMO ® -D 5l.
HYPERDESMO ® -D – one-component liquid material based on elastic polyurethane resins. Polymerizes under the influence of humidity, forming a seamless durable elastic covering.
- To protect and prevent corrosion of concrete, mosaic, metal, ceramics, wood and other building materials.
- Creation of non-dusting, antibacterial, hygienic, anti-slip, sparkles and decorative industrial flooring that can withstand light and medium loads (parking lots, warehouses, cold rooms, industrial premises, hospitals, etc.).
- Surface treatment and protection: tanks and storages with chemically, biologically and radiation-aggressive products, as well as sewage treatment plants.
- Sheeting in the food industry, the chemical industry, pharmaceutics, health care, power and mechanical engineering.
- Sealing, painting, hydrophilization of complex iron-concrete structures and elements.
- Chemically finishing and wear-resistant layer in waterproofing systems.
Categories: Bridge waterproofing, Roof waterproofing, Terraces waterproofing, Waterproofing of stands of stadiums, Waterproofing of tanks
HYPERSEAL®-25LM - Polyurethane hybrid sealant of a new generation for sealing and sealing joints. One-component paste-like material based on polyurethane. It polymerizes under the influence of air humidity. Low modulus sealant with Shore A25 hardness. Non-toxic after polymerization. Resistant to ultraviolet radiation. Due to its special hybrid composition, it has excellent adhesion on surfaces traditionally problematic for polyurethane sealants, for example, glass, aluminum, steel, polycarbonate, etc. The sealant is easy to apply even at low temperatures.
HYPERSEAL®-EXPERT-150 - Polyurethane hybrid sealant of a new generation for sealing and sealing joints. One-component paste-like material based on polyurethane. It polymerizes under the influence of air humidity. Low modulus sealant with Shore A25 hardness. Non-toxic after polymerization. Resistant to ultraviolet radiation. Due to its special hybrid composition, it has excellent adhesion on surfaces traditionally problematic for polyurethane sealants, for example, glass, aluminum, steel, polycarbonate, etc. The sealant is easy to apply even at low temperatures. HYPERSEAL®-EXPERT-150 Application conditions type of foundation Concrete, polymer cement mixtures, metal, glass, wood, etc. Base strength R28 = 25 MPa (minimum 15 MPa) Base moisture W <10% Air humidity W <85% Operating Temperature (Tvozd, Tosn) 5 ° C - 35 ° C, 3 ° C above the dew point ** It is allowed to apply sealant at low temperatures (up to -15 ° C). The necessary conditions for this are: holding the sealant before starting work in a warm room (for convenience of work) and a dry surface (no frost). The polymerization time increases. Consumption: Consumption rate 100 ml / rm (with a seam section 1 cm2) Specifications: Packaging 600ml tubes Colour White, gray, black, beige Shelf life At least 12 months (at 5-25 ° C in a dry and ventilated area) Material properties: Dry residue 100% Consistency before curing Thixotropic viscous mass Density (20 ° C) 1.45 g / cm2 Time of formation of the surface film (25 ° C, W = 55%) 2.5-3.5 hours Polymerization rate 2-3 mm / day (depending on temperature and humidity)Sealant properties: Operating temperature - 40 ° C - + 80 ° C Maximum short-term temperature + 120 ° C Hardness 25 Shore A Modulus of elasticity at 100% tensile 3.0 kg / cm2 Elasticity (elongation to break) > 700% Adhesion to concrete > 20 kg / cm2 Temperature stability (100 days at 80 ° C) sustained Accelerated Aging Test > 2000 h Toxicity None after complete polymerization Test for alkali resistance (8% KOH, 15 days at 50 ° C) No change in elasticity Test for resistance to water (H2O, 30-day cycles of 60-100 ° C) No change in elasticity Acid Resistance Test (PH = 2, 10 days @RT) No change in elasticity Certified Quality
HYPERDESMO®-2K-W is a two-component thixotropic mastic based on high-quality polyurethane resins without solvents. After polymerization, it forms a durable, flexible, hydrophobic coating for waterproofing and protection. Recommended for waterproofing tanks. It is certified for use in contact with drinking water. To put with the roller in two layers with an expense on one layer makes 1 kg / m2. At the bottom of the tank can be applied in a single layer of 2 kg / m2.
MICROSEALER-50 - single component primer low viscosity based on polyurethane for processing of various surfaces. This primer is characterized by a very low viscosity and balanced speed drying out that provides great wetting, impregnation and painting of various high and low grade surfaces porosity as well as non-porous surfaces (eg glass and metals). Besides, This primer can effectively used on dry and wet concrete, even on fresh concrete, not only as primer but also as cheap enhancing sealing material concrete life. The resulting film demonstrates excellent mechanical properties: tensile strength> 300%, tensile strength exceeds 39 N / mm2. Apply with brush or roller. Consumption: 100-200 g / m2, depending on the porosity of the surface.
Aquadur is a two-component water-based epoxy water-borne emulsion system. It is used as a primer in preparing the base for HYPERDESMO® systems or independently as a protective coating. Does not contain volatile organic solvents - can be used in poorly ventilated areas. May be diluted with water. Ideal for use in conditions of negative pressure and high humidity. It is also effectively used as a vapor barrier.
HYPERDESMO®-ADY-E - is a single-component polyurethane lacquer, which polymerizes under the influence of atmospheric humidity, forming a transparent membrane of increased elasticity with excellent uniform adhesion over the entire surface. The varnish is completely aliphatic: there is no yellowing and color change as a result of direct exposure to sunlight. It is the ideal solution for protecting HYPERDESMO® color. Based on pure elastomeric hydrophobic polyurethane resins, with the result that it has excellent resistance to mechanical, chemical, thermal and other influences. Excellently colored with Alchimica® pigment pastes. Apply by brush, roller or airless spray in one or more layers. Minimum consumption per layer: 0.1 kg / m2.
UNIVERSAL PRIMER-2K-4060 is a two-component, solvent-free polyurethane primer for HYPERDESMO® products and other Alchimica® polyurethane coatings. It is a rapidly polymerizing primer, free of toxic and volatile organic matter, which was developed for application to dry or wet concrete or other bases. Provides reliable adhesion of polyurethane coatings with the base.