Showing 13–19 of 19 results

Show sidebar

Primer water-based AQUADUR 10 kg.

3740,0 
Aquadur is a two-component water-based epoxy water-borne emulsion system. It is used as a primer in preparing the base for HYPERDESMO® systems or independently as a protective coating.     Does not contain volatile organic solvents - can be used in poorly ventilated areas. May be diluted with water.     Ideal for use in conditions of negative pressure and high humidity.     It is also effectively used as a vapor barrier.

VARNISH HYPERDESMO®-ADY-E 20

1917,6 
HYPERDESMO®-ADY-E - is a single-component polyurethane lacquer, which polymerizes under the influence of atmospheric humidity, forming a transparent membrane of increased elasticity with excellent uniform adhesion over the entire surface. The varnish is completely aliphatic: there is no yellowing and color change as a result of direct exposure to sunlight. It is the ideal solution for protecting HYPERDESMO® color.    Based on pure elastomeric hydrophobic polyurethane resins, with the result that it has excellent resistance to mechanical, chemical, thermal and other influences.    Excellently colored with Alchimica® pigment pastes.    Apply by brush, roller or airless spray in one or more layers. Minimum consumption per layer: 0.1 kg / m2.

VARNISH HYPERDESMO®-ADY-E 20 l.

8704,0 
   HYPERDESMO®-ADY-E - is a single-component polyurethane lacquer, which polymerizes under the influence of atmospheric humidity, forming a transparent membrane of increased elasticity with excellent uniform adhesion over the entire surface. The varnish is completely aliphatic: there is no yellowing and color change as a result of direct exposure to sunlight. It is the ideal solution for protecting HYPERDESMO® color.    Based on pure elastomeric hydrophobic polyurethane resins, with the result that it has excellent resistance to mechanical, chemical, thermal and other influences.    Excellently colored with Alchimica® pigment pastes.    Apply by brush, roller or airless spray in one or more layers. Minimum consumption per layer: 0.1 kg / m2.

MASTICS HYPERDESMO®-2K-W

2478,6 
HYPERDESMO®-2K-W is a two-component thixotropic mastic based on high-quality polyurethane resins without solvents. After polymerization, it forms a durable, flexible, hydrophobic coating for waterproofing and protection. Recommended for waterproofing tanks. It is certified for use in contact with drinking water.   To put with the roller in two layers with an expense on one layer makes 1 kg / m2. At the bottom of the tank can be applied in a single layer of 2 kg / m2.

PRIMER AQUASMART ® -DUR 8кг.

2828,8 
AQUASMART ® -DUR - is a two-component epoxy primer (coating), water-based. The ratio for mixing components specifically for ease of 1: 1 by volume, which allows use material in small portions.    AQUASMART ® -DUR - is low viscosity and well impregnates the base, has a long pot life after mixing the components. An excellent sheeting for concrete and metals, it is easily colored by pigment pastes for water emulsions. It has a very low tendency to yellowing under the action of ultraviolet. It is applied with a brush, roller in 1 or 2 layers.

HYPERDESMO ® -D 20л.

5236,0 
HYPERDESMO ® -D - one-component liquid material based on elastic polyurethane resins. Cures under the influence of air humidity, forming a seamless durable elastic coating. Application area:
  • To protect and prevent corrosion of concrete, mosaic, metal, ceramics, wood and other building materials.
  • Creation of non-dusting, antibacterial, hygienic, anti-slip, sparkless and decorative industrial flooring that can withstand light and medium loads (parking lots, warehouses, cold rooms, industrial premises, hospitals, etc.).
  • Surface treatment and protection: tanks and storages with chemically, biologically and radiation-aggressive products, as well as sewage treatment plants.

MASTICS AQUASMART® HYBRID MONO

1054,0 
AQUASMART® -HYBRID-MONO is a unique water-based waterproofing material that combines the best properties of acrylic and polyurethane. Completely environmentally friendly, does not require special protective equipment. It is not exposed to UV light and weather conditions, does not yellow and does not crack. Aquasmart Hybrid Mono is easy to apply on both vertical and horizontal surfaces, fully adheres to the base, and forms a seamless, elastic, rubber-like and waterproofing coating. Apply by brush, roller or airless spray in two layers.